The three coat polyurethane system in use! This bridge was marginally prepared using wire wheels and grinders. Due to a lead paint hazard, it was overcoated with two coats of permanent rust sealer and one coat of 111 topcoat. An inspection 14 years later revealed less than 5% corrosion. The bridge is located in Pittsburgh, PA. Bridges done with this three coat system have generally a 25 year service life before repainting.
FABRIC SHIELD, INC.
“After application of your MasterSeries finish, we were astounded by the results! At the end of 9 months of exposure to our chemicals, your product showed no signs of breakdown. At this point in time, we are usually descaling and sanding our equipment and repainting with our previous epoxy anti-corrosive paints. As you know, our flame-proofing chemicals being composed of salts, borates, and halogenated compounds and ammonia have destroyed our steel components every 30 months. Our projected savings and downtime and replacement costs are really beyond our expectations!”
“We have a fleet of ferry boats and other commericial applications on and around the waterfront. We have been using your product for 4 years now and have found it to be superior to any other coating. MCU has stood up to high traffic in adverse weather and environments. Additionally, the instructions provided with your products are clear, easy to understand, and thorough in content.”